C60800 is a specific type of copper alloy known as Aluminum Bronze. Here are the key details about C60800 copper coil:

Chemical Composition:

1. Copper (Cu): Approximately 91.0 - 93.5%

2. Aluminum (Al): Approximately 6.0 - 7.5%

3. Iron (Fe): Maximum 1.0%

4. Other Elements: Includes trace amounts of other elements such as nickel (Ni), manganese (Mn), silicon (Si), and zinc (Zn), typically less than 1.0% each.

Properties:

1. Mechanical Properties: C60800 aluminum bronze exhibits high strength and hardness due to its composition of copper and aluminum. It is known for its excellent wear resistance and dimensional stability under high loads.

2. Corrosion Resistance: It offers outstanding corrosion resistance in various environments, including seawater and chemical environments. This property makes it suitable for marine applications and in aggressive industrial settings.

3. Machinability: Despite its high strength, C60800 can be machined using conventional methods, although it requires appropriate tools and techniques.

4. Electrical Conductivity: While not as conductive as pure copper, aluminum bronze still retains moderate electrical conductivity, which allows it to be used in electrical applications where conductivity requirements are not as critical.

Standards: C60800 copper alloy conforms to various standards such as ASTM B148/B148M (for aluminum bronze castings) and ASTM B171/B171M (for plate, sheet, and strip).

C60800 is a copper alloy known as Aluminum Bronze. Here is the typical chemical composition of C60800 copper coil:

Copper (Cu): Approximately 91.0 - 93.5%

Aluminum (Al): Approximately 6.0 - 7.5%

Iron (Fe): Maximum 1.0%

Other Elements: Includes trace amounts of elements such as nickel (Ni), manganese (Mn), silicon (Si), and zinc (Zn), typically less than 1.0% each.

Key points about the chemical composition:

Copper (Cu): The primary component, providing the base metal with its inherent electrical conductivity and corrosion resistance.

Aluminum (Al): A significant alloying element that enhances the alloy's strength, hardness, and corrosion resistance. Aluminum also contributes to the alloy's ability to form a protective oxide layer, improving its resistance to corrosion in various environments.

Iron (Fe): Present in small amounts, iron helps in enhancing the mechanical properties of the alloy.

Other Elements: Trace elements like nickel, manganese, silicon, and zinc are included in minimal quantities to refine the alloy's properties and ensure it meets specified standards.

Properties and Applications:

Mechanical Properties: C60800 aluminum bronze exhibits high mechanical strength, hardness, and toughness, making it suitable for applications requiring durability and resistance to wear and deformation.

Corrosion Resistance: It offers excellent corrosion resistance in seawater, brine, and chemical environments. This property makes it ideal for marine and industrial applications where exposure to harsh conditions is common.

Machinability: Despite its high strength, C60800 can be machined using conventional methods. However, its hardness requires appropriate tools and techniques for machining operations.

Electrical Conductivity: While not as conductive as pure copper, aluminum bronze retains sufficient electrical conductivity for applications where moderate conductivity is acceptable.

Applications: C60800 copper coil is used in a wide range of applications including marine hardware, bearings, bushings, valve components, pump parts, hydraulic components, and aerospace components where strength, corrosion resistance, and wear resistance are critical.

C60800 copper coil, known as Aluminum Bronze, possesses several distinctive features that make it a preferred choice for various industrial applications:

Composition:

1. Copper (Cu): Approximately 91.0 - 93.5%

2. Aluminum (Al): Approximately 6.0 - 7.5%

3. Iron (Fe): Maximum 1.0%

4. Other Elements: Includes trace amounts of elements such as nickel (Ni), manganese (Mn), silicon (Si), and zinc (Zn), typically less than 1.0% each. These trace elements contribute to refining the alloy's properties.

Mechanical Properties:

1. High Strength: C60800 aluminum bronze exhibits high mechanical strength, making it suitable for applications requiring load-bearing capacity and resistance to deformation.

2. Hardness: It has excellent hardness, which contributes to its wear resistance and ability to withstand abrasive environments.

3. Toughness: Despite its hardness, C60800 retains good toughness, allowing it to absorb impact and vibration without fracturing.

Corrosion Resistance:

1. Excellent Corrosion Resistance: C60800 offers exceptional resistance to corrosion in various environments, including seawater, brine, and chemical solutions. This property makes it ideal for marine and industrial applications where exposure to harsh conditions is common.

Machinability:

1. Moderate Machinability: Aluminum bronze is machinable using conventional methods, though it requires tools and techniques appropriate for its hardness and strength. Proper machining practices help maintain dimensional accuracy and surface finish.

Wear Resistance:

1. Outstanding Wear Resistance: Due to its composition and structure, C60800 is highly resistant to wear and erosion, making it suitable for components subjected to sliding and abrasive wear, such as bearings, bushings, and gears.

Heat Conductivity:

1. Good Heat Conductivity: Aluminum bronze has good thermal conductivity, which allows for effective heat dissipation in applications involving high temperatures or thermal cycling.

Applications:

1. Marine Applications: C60800 is widely used in marine environments for components such as propellers, shafts, and fittings due to its excellent corrosion resistance and mechanical properties.

2. Industrial: It finds use in heavy-duty industrial applications where wear resistance, strength, and corrosion resistance are crucial, such as valve components, pump parts, and bearings.

3. Aerospace: Used in aerospace applications for its combination of strength, corrosion resistance, and heat conductivity.

4. Automotive: Found in automotive components subjected to wear and corrosion, such as bushings and gears.