8011 Aluminum Bar

Introduction:
1. Low MOQ and Flexible Production Ability.
2. Quick delivery and standard industry exporting package.
3. Best service with quick  reply 
4. OEM and ODM, welcome customers to visit our factory for better understanding;
5. Value friendship and trustworthy, devote to provide long-term service to our distinguished customers.

Product Introduction

8011 aluminium alloy is a wrought alloy.and it is otherwise unclassified series. Due to 8011 aluminum alloy contains Al-Fe-Si and other chemical elements, 8011 aluminium plate has a lot of alloy advantages.

ComponentContent(%)
Aluminum (Al)97.5~99.1
Iron (Fe)0.60~1.0
Silicon (Si)0.50~0.90
Copper (Cu)0~0.1
Manganese   (Mn)0~0.1
Magnesium   (Mg)0~0.1
Zinc (Zn)0~0.1
Chromium (Cr)0~0.1
Titanium (Ti)0~0.05
Residuals0~0.15

8011 Aluminum Alloy Properties

Density: 2.71 g/cm3;

Aluminium 8011 thermal conductivity is about 237 W/mk;

Surface properties: 8011 aluminium alloy has excellent surface properties, such as wettability, corrosion resistance and so on. Thus, we can cut 8011 aluminium plate into different shapes according to our actual uses;

Strength-and-weight ratio: lightweight is an obvious advantage of 8011 aluminium sheet compare with copper, iron and other metals.

Tensile   Strength(MPa)Yields   Strength(MPa)Elongation(%)
125~1651102~5


Corrosion Resistance

aluminum 8011 offers excellent corrosion resistance due to its high content of magnesium and manganese. The alloy provides excellent protection against oxidation, which makes it a great choice for outdoor applications where exposure to moisture or saltwater could be an issue. This means that products made from aluminium 8011 will last longer without having to be replaced or repaired due to oxidation damage.


Heat Treatment

Heat treatment is often needed when working with metals like aluminum 8011 as it helps improve the material’s mechanical properties, such as its hardness or strength. Heat treating can also help reduce stresses within the material, which can lead to cracking or warping after welding or machining operations have been completed. Heat treatment is typically done by heating up the material to a specific temperature before allowing it to cool down at a controlled rate afterwards.


Machining

Machining aluminium 8011 can be done with various tools, including drills, cutting tools and milling machines depending on what type of part needs to be produced. The alloy is relatively easy to machine compared to other metals, but care must be taken when doing so as it can produce large amounts of heat, which may cause warping if not handled correctly.


Welding

Aluminium 8011 Welding aluminum 8011 requires special attention because of its tendency to crack during welding operations due to its high thermal conductivity. It should be welded using either TIG (Tungsten Inert Gas) or MIG (Metal Inert Gas) processes with proper shielding gas mixtures in order to ensure optimal performance during welding operations.


Application

Construction/Indutry/Building/Chemical/Auto

 

Because 8011 aluminium plate owns so many metal properties, it is now being used in more and more modern industries, for example: building trades, automotive industries, various types of packaging, electronic original, daily supplies, etc.

 

8011 aluminum plate has excellent wettability, so it is the best material of air-to-air heat ex-changer fins. What’s more, another advantage of 8011 aluminum sheet is good corrosion resistance, it makes the heat exchangers very durable.

 

8011 aluminum plate is easy to drill, to tap and to form into different shapes, and the weight is light, so it is widely used in packaging, especially packaging for drug and food. This is due to the corrosion resistance and nontoxic characteristics of 8011 aluminium plate.

 


Online Message

Submit

Other Products